Product Description
Granville HT Instant Gasket is a high temperature one
component silicone sealant especially developed for areas
that are exposed to high temperatures. High Temperature
Instant Gasket is ready to use in a double-piston aerosol
power can.
Product Benefits
* Resists temperatures between -50°C & 300°C intermittent
* Suitable for use on vehicles with catalytic convertor fitted
(when fully cured)
* Allows controlled application
* Gives a professional finish
* Considerably reduces wastage of expensive silicone
Product Usage
For sealing and gasketing of components that are subject to high temperatures.
Not recommended for use on head gaskets or parts requiring continuous immersion in petrol. Product withstands high
temperatures up to 300°C intermittent. When used on vehicles with catalytic convertors ensure product is totally cured
before running engine. Full cure takes 24 hours.
Directions for Use
Surfaces must be stable, clean and free of oil, grease and old gasket matter. Remove cap by pulling firmly. Rotate flow
control adjacent to trigger approximately 10mm. Place the nozzle at start of joint to be filled. Press trigger and draw
nozzle along joint/surface in one continuous movement.Rate of sealant flow can be regulated by rotating flow control.
When finished, return flow control to starting position indicated by MIN and replace cap to reduce curing in nozzle. If
joint is to be dismantled at a later stage smear oil lightly onto one surface and bolt down. Do not overtighten bolts.
Storage Instructions
Store in a cool, dry place away from direct sunlight and sources of ignition.
Reviews
There are no reviews yet.